top of page

Overview

The Smart Fill is Compact, Transportable and offers quick and easy preparation of up to 10 liters dissolution media in less than 15 minutes. In a single pass the media for dissolution tests can be precisely heated, degassed and filled gravimetrically into vessels. Foaming media like SDS (Sodium Dodecyl Sulphate) can also be used.

Integrated Dosing port. Optional Remote Filling Hand to fill the media Directly into the Dissolution Tester Vessel using Dedicated Switch FLUSH,START,STOP, WASH.

Features

  • Smart Design: Microprocessor Controlled Touch Screen Display with Easy to use Interface allows User to Program all Important Function like Heating, Vacuum Degassing.

  • Smart Sensor: Will detect the jars and Only Dispense Media only if Jar is placed in Position of Dispense.

  • In Line heating: It Helps Avoid Time Delays associated with Convectional heating Method. The System is ready to prepare Media immediately upon on power up.

  • Piston Controlled Vacuum Chamber: for Highly Effective De-aeration and Precise Media Volume.

  • Variable Dispense Volumes: Variable Dispense Volumes of 200 mL to 1000 mL.

  • Dispensing Method: Volumetric and Gravimetric.

  • Validation and calibration: Inbuilt for temperature and volume.

  • Quick Documentation: Quick Documentation via Mobile Thermal Printer.

Specification

  • Function : Heating and Vacuum Degassing

  • Pharmacopoeia Conformance: USP, EP.

  • Control: Smart Touch Panel 7".

  • Time Needed for Degassing: 1000 mL in less than 110 sec.

  • Dispensing Volume: 200 ml to 1000 ml to 200 g to 1000 g.

  • Dispensing time: 1000 mL in less than 110 sec at 41°C in ambient temperature.

  • Heating Capacity: Up to +20°C deg. increase from Ambient Temperature to Max of up to 45°C.

  • Input Filter: 25 mm in-line filter holder.

  • Dispensing Accuracy: ±1% of set volume, but not less than ±5 mL.

  • Degassing: Up to a maximum of 3.0 ppm, to a level of not less than 5.0 ppm.

  • Temperature Control: Cartridge Heater.

  • Temperature Accuracy: ± 2°C.

  • PC Interface: RS-232 (serial) & Thermal Printer.

  • Height: 32.28" (82 cm).

  • Width: 15" (38 cm).

  • Depth: 17.32" (44 cm).

  • Weight: 37.0 Kg.

  • Electrical Power : 220 V ± 15 V 50 Hz 8 Amps

  • Operating voltage pre-set at factory

bottom of page